Sökning

Modelling of open-eye formation and mixing phenomena in a gas-stirred ladle for different operating parameters

QR-kod

Modelling of open-eye formation and mixing phenomena in a gas-stirred ladle for different operating parameters

Abstract

In ladle metallurgy, gas stirring and the behaviour of the slag layer are very important for alloying and the homogenization of the steel. When gas is injected through a nozzle located at the bottom of the ladle into the metal bath, the gas jet exiting the nozzle breaks up into gas bubbles. The rising bubbles break the slag layer and create an open-eye. The size of the open-eye is very important as the efficiency of the metal-slag reactions depend on the interaction between the slag and steel created during the stirring process, and information about the position and size of the open-eye is important for effective alloying practice. Moreover, the open-eye has an effect on the energy balance since it increases heat losses. In this study, experimental measurements and numerical simulations were performed to study the effect of different operating parameters on the formation of the open-eye and mixing time in a water model and industrial ladle. Experimental measurements were performed to study the effect of the gas flow rate, slag layer thickness, slag layer densities and number of porous plugs in a 1/5 scale water model and in a 150-ton steelmaking ladle. For numerical modelling, a multi-phase volume of fluid (VOF) model was used to simulate the system including the behaviour of the slag layer. The numerical simulation of the open-eye size and mixing time was found to be in good agreement with the experimental data obtained from the water model and data obtained from the industrial measurements.

Tiivistelmä

Senkkametallurgiassa kaasuhuuhtelu ja kuonakerroksen käyttäytyminen ovat tärkeitä teräksen seostamisen ja homogenisoinnin näkökulmasta. Senkan pohjalla sijaitsevasta suuttimesta puhallettava kaasu hajoaa kupliksi, jotka rikkovat kuonakerroksen ja muodostavat avoimen silmäkkeen. Avoimen silmäkkeen koko on yhteydessä voimakkaampaan kuonan emulgoitumiseen, joka tehostaa metallisulan ja kuonan välisiä reaktioita. Tietoa avoimen silmäkkeen paikasta ja koosta tarvitaan myös tehokkaaseen seostuspraktiikkaan. Avoin silmäke vaikuttaa lisäksi prosessin energiataseeseen lisäten sen lämpöhäviöitä. Tässä tutkimuksessa tutkittiin kokeellisesti ja laskennallisesti erilaisten operointiparametrien vaikutusta avoimen silmäkkeen muodostumiseen vesimallissa ja terässenkassateollisessa senkassa. Kokeellisia mittauksia tehtiin kaasuhuuhtelun, kuonakerroksen paksuuden, ja suuttimien määrän vaikutuksen tutkimiseksi 1/5-mittakaavan vesimallissa ja 150 tonnin terässenkassa. Numeerisessa mallinnuksessa systeemin ja siihen lukeutuvan kuonakerroksen käyttäytymisen simuloimiseen käytettiin volume of fluid (VOF) -monifaasimenetelmää. Avoimen silmäkkeen kokoon ja sekoittumisaikaan liittyvien numeeristen simulointien havaittiin vastaavan hyvin vesimallista ja teollisista mittauksista saatua kokeellista aineistoa.

Sparad: