Centralized Protection System in Distribution Substation

Aineiston käyttöoikeudet
fi=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|sv=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|en=All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.|
QR-koodi

Centralized Protection System in Distribution Substation

This bachelor’s thesis was commissioned by ABB Oy, Power Grids Integration in Vaasa, Finland. The task was to examine the centralized protection and control system and make a template configuration for a typical distribution substation. The work scope also included development of signal list, relay interface list and IP-Address list. During the work, I’ve mainly worked with the PCM600 software. I’ve collected information about traditional relay configuration and implemented the functions for the new configuration. During the work, essential functions in the configuration were tested in the FAT area with OMICRON relay test and commissioning tool. The result of this bachelor’s thesis is a complete configuration for a whole substation. That includes configurations for SMU615, SSC600, and RIO600. Three different documents were also developed as assistance for the configuration, a signal list, a relay interface list and an IP-Address list.

Detta examensarbete var ett beställningsjobb av ABB Oy, Power Grids Integration i Vasa, Finland. Uppgiften var att undersöka det centraliserade skydds- och kontrollsystemet och göra en mallkonfiguration för typiska distributionstationer. Till arbetet hörde också utveckling av signallista, relägränssnittslista och IP-adresslista. Under arbetets gång har jag huvudsakligen arbetat med PCM600-programvaran. Jag har samlat in information om traditionella reläkonfigurationer och implementerat funktionerna för den nya konfigurationen. Under arbetets gång testades grundläggande funktioner av konfigurationen i FAT-områden med OMICRON relätestverktyg. Resultatet av detta lärdomsprov är en komplett konfiguration för en hel elstation. Det inkluderar konfigurationer för SMU615, SSC600, och RIO600. Tre olika dokument utvecklades som stöd för konfigurationen, signallista, relägränssnittslista och IPadresslista.

Tallennettuna:
Kieli
englanti
Aiheet